Menu Structure - Continental ContiPressureCheck Manual De Instrucciones

Menu structure

Check sensor
Activate Sensor
Deactivate Sensor
Actions on Tire
Show
Check
Activate
Deactivate
Check all tires
Sni ing Tool
Trigger Tool
New Installation
Resume
installation
Test drive
Modify Installation
Check Installation
Modify Parameters
Modify Sensor IDs
Activate CPC
Deactivate CPC
DTC (error code)
Global DTCs
Tire-related DTCs
Erase all DTCs
Save DTCs
54
Read the data of the tire sensor.
Switch sensor to operating mode.
Switch off cyclic transmission (power save mode).
Display last received tire sensor data.
Read the data of the tire sensor.
Switch sensor to operating mode.
Switch off cyclic transmission (power save mode).
Interrogate tire sensor data for vehicles without CCU and DSP.
Special function:
Tool receives all tire sensors within reception range.
Special function:
The transmission power of the interrogating signal can be
varied accordingly.
Create a new CPC system configuration.
Continue an interrupted CPC system configuration.
Check the reception quality if the CPC systems installed.
Check the existing configuration parameters.
Change the already defined configuration parameters.
Renew assignment of the sensor IDs.
Activate the CPC system.
Deactivate the CPC systems temporarily.
Display general error messages.
Display of error messages that refer to a specific tire.
Delete all pending error messages.
Save all pending error messages.
CPC hand-held tool