Sd Memory Card - Continental ContiPressureCheck Manual De Instrucciones

SD memory card

Slot for SD memory card
The SD memory card is supplied with the hand-held tool by default.
►
If no SD memory card is inserted in the hand-held tool, the memory
card is either defective or the software was not correctly installed, only
"ENGLISH" is available.
►
Storing of DTCs and log files is not possible without an SD memory card.
Handling data on the SD memory card
Access to the SD memory card takes place via a USB connection to the PC as described
under "Connection to the PC".
►
Failure to observe the specifications on handling files on the SD memo-
ry card can lead to malfunction and total failure of the hand-held tool or
the CPC system.
►
The directory structure and naming as well as the content of the files
may not be changed
►
Do not erase any files on the memory card!
The log files ("\REPORT") are an exception and can be copied and dele-
ted without aff ecting the system.
Directory structure
CONFIG
LANGUAGE
REPORT
TEMP
UPDATE
If the hand-held tool is to be connected to a PC via the USB cable and PC,
only "English" is available:
►
Follow the menu path "Diagnosis/Connection to PC" to connect the
hand-held tool to the PC.
56
Configuration files for the hand-held tool
Language files for the hand-held tool
Log files
Temporary files.
Files for updating the software of CPC components
CPC hand-held tool