Using The "Elapsed Time" Function - De Dietrich DTI 1127 X Manual De Instrucciones

3 3 / / USING YOUR APPLIANCE

USING THE "ELAPSED TIME" FUNCTION

•
This function displays the time elapsed since
the last time the power setting was adjusted
on a given burner.
— To use this function, press the
(Fig. 01) .
The time elapsed appears in the display.
If you want your cooking to finish within a
defined time.
— Press touch control
5 seconds, slide your finger on the timer slider
to increase the cooking time to the value you
want (Fig. 02) .
The time display becomes fixed for 3 seconds,
then the remaining cooking time will appear.
A beep will confirm your choice.
This function can be used with or without the
timer.
— If a time is displayed on the timer, this
time cannot be modified for 5 seconds after
the touch control
After these 5 seconds have elapsed, you can
modify your cooking time.
button
then, within
has been pressed.
Fig. 01
To increase
Fig. 02
59
EN