Adjusting The Timers; Using The "Child Safety" Function; Clean Lock - De Dietrich DTV 714 Manual De Instalación Y Utilizacion

9964-2701_ML.qxp 06/04/2007
2 / USING YOUR APPLIANCE
SETTING THE TIMERS
There is a timer available for each cooking
zone to set the cooking time.
By pressing the button
can highlight and select the cooking zone to
which you wish to apply the timer.
The LED displays only for the zones that are
on.
• • To use the timer:
1 1 - Turn on the cooking zone
2 2 - set the power level.
3 3 - Position the rotating symbol on this coo-
king zone.
4 4 - Set the duration by pressing "
When the cooking is finished the zone swit-
ches off, the timer starts flashing "0 0 " and a
b b e e e e p p sounds to let you know.
5 5 - Press the touch control "+ + " pr "- - " on the
timer to stop the beeping.
• • To change the timer settings:
1 1 - Position the rotating symbol by highligh-
ting the cooking zone you want to change.
2 2 - Press the touch control "+ + " or "-" of the
timer.
• • To stop the timer
1 1 - Position the rotating symbol by highligh-
ting the cooking zone you want to change.
2 2 - Press for several seconds, simultaneously,
the touch controls "+ + " and "-" of the timer, or
the touch control "- - " of the timer until 0 0 .
• • To set another timer
Set the rotating display to another zone. The
display will light up, set the duration.
Warning
When more than one timer is working,
the highlight display indicates the zone
whose timer can be changed or turned off.
16:17 Page 25
• •
USING THE "CHILD SAFETY"
FUNCTION
- Press on the touch control until you hear a
beep and the indicator lights up. The indica-
tor will go out automatically after a few
moments.
repeatedly you
To unlock:
- Press on the touch control
a double beep and the indicator goes out.
N N o o t t e e : :
- In locked mode, any action will produce a key
: symbol on the display. You must unlock your
hob before using it.
- If you activate the lock while cooking, the
stop display will be prioritised on the lock.
• •
+ - -

CLEAN LOCK

" or " ".
This function allows you to temporarily lock
your hob while cleaning.
To activate Clean lock:
- Your cooking hob must be turned off.
- Press on the touch control briefly
will hear a beep and the indicator will start
flashing.
- After a predefined time, the lock will automa-
tically disengage. A double beep sounds
and the indicator goes out.
:
reusing it (see section "usiing the child
safety function").
25
This function allows you to lock
your hob when it is shut off or
when it is cooking.
To lock:
until you hear
Tip
Remember to unlock your hob before
EN
; you