Woods AD Serie Manual Del Usuario página 15

Troubleshooting
If you are having trouble with your Wood's product, please refer to the below troubleshooting.
If nothing of the below works, please contact your retailer for servicing of your product.
Trouble Cause
The unit Is the power cord connected?
doesn't work
Is the room temperature over 35°C
or below 5°C?
Is ambient humidity level below set value?
Is the filter blocked?
The unit
doesn't start
Is the air inlet or air outlet jammed?
No air inlet Is the filter blocked?
Abnormal noise Is the unit inclined?
Is the filter blocked?
Is the room temperature above
Error code C1
50°C or below 0°C?
Malfunction of defrost sensor
Is the room temperature above
Error code C2
50°C or below 0°C?
Malfunction of humidity or
temperature sensor
Refrigerant leakage
Error code C8
This marking indicates that the product should not be disposed of with other household waste throughout the EU. To prevent
damage to the environment and people from uncontrolled waste management, recycle the product responsibly to support
the sustainable reuse of resources. To return the product, please contact your dealer..
English
Solution
Connect the unit to a power outlet
Increase or decrease
room temperature
Decrease set value or choose
continuous dehumidification
Clean or replace the filter
Clear the blockage
Clean or replace the filter
Move the unit to a flat and solid
ground
Clean or replace the filter
Increase or decrease
the room temperature.
Contact your retailer
Increase or decrease
the room temperature.
Contact your retailer
Contact your retailer
15