First Steps; Initializing - BRAND Titrette Instrucciones De Manejo

Is everything in the package?
Confirm that your package includes: Titrette
(length 170 - 330 mm); recirculation tube; 2 micro-batteries 1.5 V (AAA/UM4/LR03); 4 bottle adapters PP
(GL 45/32-33, GL 45/38, GL 45/S 40, GL 32-33/NS 29/32); 2 colored light shield inspection windows;
performance certificate; and this operating manual.

Initializing

1.
Insert batteries
2.
Switching the
instrument ON
or OFF
bottle-top burette, size 25 ml or 50 ml; telescoping filling tube
®
a) Unscrew the air vent cap by hand or
use a coin (Fig. a).
b) Remove the rear housing (Fig. b).
c) Remove the battery case cover and
insert the batteries. Observe the cor-
rect polarity of the batteries (Fig. c).
d) Close the covers of the battery case
tightly. Carefully press the edges so
that the entire cover rests firmly and
without a gap between it and to the
battery case.
e) First connect the housing at the top,
then snap it closed.
f) Screw in the air vent cap.
Press the On/Off key briefly
to switch the instrument on
or off.
a
b
c
1x

First Steps

39