The First Steps - BRAND Transferpette electronic Instruccionesde Manejo

Is everything in the package?
Confirm that your package includes: Transferpette
tery, power supply unit with battery charging cable, two ejector-adjustment
clips (not with Transferpette
manual and one bag with sample pipette tips.
Initializing the Transferpette
1.
Insert the
battery
2.
Activate the
instrument
®
electronic 2-20 µl), silicone oil, operating
®
electronic
a) Open the cover of the battery compartment.
b) Insure that the plug for the battery is firmly
connected to the pipette. Insert the battery.
c) Replace the battery compartment.
®
The Transferpette
electronic automatically
requests a reference run
directly after the battery is
inserted. After the pipetting
key is pressed, the reference
run is carried out and the
instrument is now ready for
pipetting.
The display shows the
standard factory setting
(pipetting mode/PIP);
and the nominal volume
(for example, 200.0 µl).
Default aspiration and dis-
charging speeds are at maxi-
mum. The adjustment of
volume and speed is de-
scribed on the following
pages.
®
electronic pipette, bat-
1x
Pipetting mode
Battery charge
indicator
Up arrow,
indicating
aspiration
Volume setting

The First Steps

A
B
C
37