Scope of delivery:
2x mirror extensions(1)
1
2
3
4
2x allen head screws M10x1.25x30 (2)
2x spacers (3)
2x plastic caps (4)
Preparations
- Loosen the lock nut and rear mirror (5) from the rear mirror adapter (6).
- Remove the rear mirror adapter (6).
5
6
6
4
Assembly
3
4
1
- Premount the mirror extension (1), allen head screw M10x1.25x30 (2) and
2
spacer (3) and screw them onto the rear mirror holder.
- Mount the plastic cap (4).
- Remount the rear mirror adapter (6).
- Remount the rear mirror (5).
NOTE:
Screw the rear mirror into the rear mirror adapter as far as possible, move it
into the correct position and fix it in the desired position with the lock nut
5
6
- Repeat the same procedure with the second rear mirror.