Important - Miller Honeywell SOLL WAPP Manual Del Usuario

Instructions for Use
EN
Honeywell Miller anchoring plates are protective devices against falls from
heights.
This equipment, which fulfils standard EN 795 type 1, was developed to attach a
worker to the anchoring equipment via personal protective equipment (PPE) that
meets the applicable standards.
TECHNICAL SPECIFICATIONS: (see pictures in 1, 2, 3, 4)
Product name:
SÖLL WAPP (1009489)
SÖLL ANCRAGE TDC (1002996)
SÖLL ANCRAGE VISION
(1009975)
SÖLL MAXIBILLE (1009521)
EXPLANATION OF SYMBOLS
DANGER!
Incorrect or careless handling may result in accident, including a fall or
death.
CAUTION!
Disregarding the regulations may result in serious injury.

IMPORTANT!

Useful information and advice for the user.
Personal protective equipment
Equipment for temporary anchoring
Fulfils standard EN 795:2012 TYPE A
1- INTRODUCTION
You just obtained an anchoring device. Thank you for your confidence in our
products.
In order for the product to meet your utmost satisfaction, it is essential before
installing and using the anchoring equipment to read this manual and understand
it. Do not install the equipment alone, or alter any part of it, if you do not have the
qualifications to do so.
KEEP THIS MANUAL FOR THE NEXT USE – DO NOT THROW IT OUT!
Danger!
Disregarding these instructions may hinder the correct functioning of this
product, which is meant to catch falls, and may thus result in serious or even fatal
injury to the user.
All equipment users must have this manual close at hand.
14
Figure:
Fig. 1 75.5 x 51.5 x 46.5 mm
0.125 kg
Fig. 2 89 x 42 x 40 mm 0.065 kg
Fig. 3 123x 92x 45.5 mm 0.139 kg
Fig. 4 1009521=1009516+1009518
160x63x38 mm 0.43Kg
Note: