Sanus VISIONMOUNT VM400 Instrucciones De Montaje página 15

Adjust Monitor Position
A. Adjust Level
B. Adjust left/right swivel tension.
CAUTION: Avoid potential injuries or property damage! Remove the safety bracket (B) only to adjust the swivel tension nut (C). Be sure to replace the
safety bracket after adjusting the swivel tension nut. The hex hole in the safety bracket must seat over the swivel tension nut.
C. Adjust up/down tilt tension.
NOTE: Adjust the pitch tension by tightening or loosening the tension knobs (D).
D. Adjust arm extend/retract tension.
CAUTION: Do not remove the tension nuts (T). Removing the tension nuts may cause the television to fall, resulting in property damage and possible
personal injury. Tighten or loosen only as necessary for easy arm adjustment. The top tension nut [TN] should never need adjustment.
A
B
6901-002103 <00>
OPT
[26]
(B)
(C)
(B)
7
15