Machine Maintenance; Daily Maintenance - Nobles SpeedGleam Serie Manual Del Operador

5. With the charger's power supply cord unplugged,
connect the battery charger into the machine as
shown. Flip up the hood support stand and rest
the hood on the stand to promote ventilation while
charging (Figure 22).
FIG. 22
NOTE: As a safety precaution, once the charger is
connected to the machine, the machine will become
inoperable.
6. Then plug the charger's power supply cord into a
grounded wall outlet (Figure 23).
Grounded
3 Hole Outlet
Ground Pin
FIG. 23
FOR SAFETY: Do not operate charger unless cord
is properly grounded.
7. The charger will automatically begin charging and
shut off when fully charged.
8. When disconnecting the charger from the
machine, always unplug the charger from wall
outlet first to prevent charger damage.
9. Recheck battery fluid level (A) after charging. If
needed, add distilled water to bring the level 1cm
(3/8 in) from bottom of sight tubes (B). Be certain
to replace cell caps securely and to wipe off the
top of batteries with a clean cloth.
B
FIG. 24
Nobles SpeedGleam/Plus (01–02)
A
Home Find... Go To..

MACHINE MAINTENANCE

To keep machine in good working condition, simply
follow machines daily, weekly and monthly
maintenance procedures:
FOR SAFETY: Before leaving or servicing
machine, stop on level surface and turn off
machine.
FOR SAFETY: When servicing machine,
disconnect battery connections before working on
machine.
FOR SAFETY: When transporting machine, do not
lift machine if batteries are installed.

DAILY MAINTENANCE

(Every 4 Hours of Use)
1. Remove the burnishing pad and clean or replace
(Figure 25).
FIG. 25
2. Empty or replace the dust control bag. Remove
the bag clip to empty bag (Figure 26). Do not allow
bag to fill beyond half full.
FIG. 26
OPERATION
13