Consumable Parts - Star TSP600 Serie Manual Del Usuario

Consumable Parts

When consumable parts have run out, use those specified in the table below. Make sure that the
AC adapter specified in the table is used.
Use of consumable parts or AC adapter which are not specified in the table may result in damage
to the printer, fire or electric shock.
(1) Roll paper specification
Thermal paper
Thickness: 65~85 µm
Width: 79.5±0.5 mm (57.5±0.5 mm when the optional paper roller holder is used)
Outer roll diameter: ø90 mm or less
Core outer/inner diameter
Paper thickness
65~85 µm
Printed surface: Outer edge of roll
Tail end handling:
(2) Recommended paper
Mitsubishi Paper Mills Limited
P220AG (normal type paper), 65 µm (thickness)
HP220A (high image stability paper), 65 µm (thickness)
HP220AB-1 (high image stability paper), 75 µm (thickness)
P220AB (normal type paper, card ticket), 85 µm (thickness)
PB670 (2 color paper: Red & Black), 75 µm (thickness)
PB770 (2 color paper: Blue & Black), 75 µm (thickness)
Oji Paper Co., Ltd.
PD150R (normal type paper), 75 µm (thickness)
PD160R (high image stability paper), 65/75 µm (thickness)
PD750R (2 color paper: Red & Black), 75 µm (thickness)
PD700R (2 color paper: Blue & Black), 75 µm (thickness)
Nippon Paper Industries
TF50KS-E2C (normal type paper), 65 µm (thickness)
Kanzaki Specialty Papers Inc. (KSP)
P320RB (2 color paper: Red & Black), 65 µm (thickness)
P320BB (2 color paper: Blue & Black), 65 µm (thickness)
Depending on the type and thickness of the paper, it may be necessary to change the settings for
printing darkness. To change the darkness settings, use the printing darkness settings command
<ESC><RS> 'd' n. Refer to the separate programmer's manual for details.
Core outer
ø18±1 mm
Do not use paste or glue to secure the roll paper or its core.
Do not fold the tail end of the paper.
– 5 –
Core inner
ø12±1 mm