Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
en-us
Installation and connection
Installation and connection
5
C ontents of package
I n s t a l l a t i o n a n d c o n n e c t i o n
After unpacking all parts, check for any damage during
transport.
If you have any complaints, please contact the dealer
from whom you purchased the appliance or our customer
service.
~ "Customer service" on page 33
The delivery consists of the following parts:
Built-in appliance
▯
Equipment (depending on model)
▯
Installation material
▯
Instruction manual
▯
Installation instructions
▯
Customer service booklet
▯
Warranty enclosure
▯
Information on the energy consumption and noises
▯
Technical data
Refrigerant, cubic capacity and further technical
specifications can be found on the rating plate.
~ "Getting to know your appliance" on page 11
Installing the appliance
Installation location
The weight of the appliance may be up to 460 kg
depending on the model. The base must be sufficiently
stable and should not give. If necessary, reinforce the
floor.
Check built-in cut-out
The cut-out must fulfill these criteria:
Anti-tilt bracket must be fitted
▯
Cut-out depth min. 24" (610 mm), for flush installation
▯
25" (635 mm)
rectangular
▯
stable – the side panels and the top must be min. 5/8"
▯
(16 mm) thick and securely attached to the floor or
wall
Depth of shortest side panels min. 4" (100 mm)
▯
8
Side-by-side installation
Observe the specifications in the installation instructions
for a side-by-side installation.
If a partition wall is required between the appliances it
must be at least 5/8" (16 mm) wide.
Publicidad
Capítulos
Tabla de contenido
