Windows Vista Installation - Conceptronic CCSERU Manual De Instalación

ENGLISH

2.3 Windows Vista installation

A. Click on the Start Menu and select 'Computer'.
B. Navigate to the CD-ROM of the CCSERU.
C. Open the folder 'Drivers'.
D. Open the subfolder 'WinVista'.
E. Run the application 'Setup_Vista.exe' by double-clicking on it.
The Setup Wizard will appear.
F. Click 'Next' to continue.
G. Select 'I Accept..' and click 'Next' to continue.
The wizard will install the USB to Serial cable.
H. When the wizard is complete, click 'Finish' to exit the wizard.
When the installation is finished, you can connect the USB to Serial cable to a free USB
port on your computer. Windows Vista will automatically install the drivers for your USB
to Serial cable.
Note: It is advised to reboot your computer before you use the cable.
Your USB to Serial cable is now ready to use!
6