Senco DURASPIN DS522-18V Instrucciones De Empleo página 16

The battery pack houses 4 coloured LED lights. These LEDs indicate the state of charge and possible problems inside the
battery pack.
Battery Pack
Mode
Inserted?
EN
Standby/Power No
Standby Full Yes
Charging Yes
Fully Charged Yes
Evaluating Yes
*Temp Delay Yes
Defective Yes
*Delay up to 20 minutes depending on battery cell temperature inside pack.
Press raised red button on battery pack to check charge:
y Red Flashing = 0-15% Charge
y Red On = 16-25% Charge
y Red and Orange On = 26-50% Charge
y Red, Orange, and Green On = 51-75% Charge
y All On = 76-100% Charge
Tips for maintaining maximum battery life:
y Charge the battery pack before it is completely discharged.
y Always stop tool operation and charge the battery when you notice less tool power.
y Never recharge a fully charged battery.
y Overcharging shortens the battery service life.
Battery Disposal
y To preserve natural resources, please recycle or dispose of properly. This product contains Li-Ion. Local state or
federal laws may prohibit disposal of Li-Ion batteries in ordinary trash.
y Consult your local waste authority for information regarding available recycling and/or disposal options.
y Do not dispose of electric tools together with household waste material! In observance of European Directive
2002/96/EC on waste electrical equipment and its implementation in accordance with national law, electric
tools that have reached the end of their lives must be collected separately and returned to an environmentally
compatible recycling facility.
TOOL OPERATION
Charging/Full
Power
Fade X
Fade Fade
Solid Green Flashing Green
Fading Green Fading Green
Solid Green X
Solid Green X
Solid Green X
Figure 2 - Battery Charge Level Lights
16
Condition
Evaluate
X X
Ready for Use X
<80% X
100% X
Measuring Flash Orange
Hot/Cold X
Damaged X
Temp. Delay Defective
X X
X X
X X
X X
X X
Flash Orange X
X Solid Red