Tabla De Contenido - Elcometer MTG2 Guia Del Usuario

CONTENTS
Section
1 Gauge Overview
2 Box Contents
3 Using the Gauge
4 Getting Started
5 Setting the Zero Point
6 Calibration Methods - MTG4
7 Calibrating Your Gauge - MTG4
8 Taking a Reading
9 Menu Structure - MTG4
10 Menu Structure - MTG2
11 Upgrading Your Gauge
12 Spares & Accessories
13 Technical Specification
14 Legal Notices & Regulatory Information
15 Appendix 1: Preparing The Test Surface
Pb Hg
For the avoidance of doubt, please refer to the original English language version.
Gauge Dimensions: 145 x 73 x 37mm (5.7 x 2.87 x 1.46") - without transducer
Gauge Weight: 210g (7.4oz) - including batteries, without transducer
Material Safety Data Sheets for the ultrasonic couplant supplied with the Elcometer MTG2 & MTG4 and available as
an accessory, are available to download via our website:
Elcometer Ultrasonic Couplant Material Safety Data Sheet:
www.elcometer.com/images/stories/MSDS/Elcometer_Ultrasonic_Couplant_Blue.pdf
Elcometer Ultrasonic Couplant (High Temperature) Material Safety Data Sheet:
www.elcometer.com/images/stories/MSDS/elcometer_ultrasonic_couplant_hi_temp.pdf
© Elcometer Limited 2014 - 2018. All rights reserved. No part of this document may be reproduced, transmitted, transcribed,
stored (in a retrieval system or otherwise) or translated into any language, in any form or by any means (electronic,
mechanical, magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Limited.
en-1
R
Page
en-2
en-2
en-3
en-3
en-6
en-7
en-8
en-9
en-10
en-11
en-11
en-11
en-15
en-16
en-17
www.elcometer.com