Mise En Marche Getting Going Anleitung; Mise En Marche; Getting Started - Buki MR400 Manual De Instrucciones

Tabla de contenido

Publicidad

Mise en marche

Getting going
Anleitung
3 3
2 2
Mise en marche
FR
Place l'oculaire sur le tube du microscope.
1.
Allume l'éclairage, puis place la lame
2.
d'échantillons bleue sur la platine. Le mieux
pour commencer est de mettre l'échantillon de
l'oignon.
Descends au maximum l'objectif grâce à la
3.
molette, puis regarde dans l'oculaire. Pour le
moment, tu ne vois qu'une tâche rose et floue.
Tout en regardant dans l'oculaire, monte
4.
l'objectif
doucement
Progressivement, la mise au point va se faire et
tu vas commencer à voir les détails des cellules
de l'oignon.
1
1
avec
la
molette.
4 4

Getting started

EN
Place the eyepiece on the microscope tube.
1.
Switch on the light, then place the blue sample
2.
slide on the stage. The best sample to start with is
the onion sample.
Lower the lens to the bottom using the wheel
3.
and look through the eyepiece. For the moment,
you should only be able to see a blurry pink image.
Still looking through the eyepiece, raise the lens
4.
slowly with the wheel. The image will gradually
come into focus and you will start to see the detail
of the onion cells.
4

Publicidad

Tabla de contenido
loading

Tabla de contenido