Kärcher SB VC 1 Manual De Instrucciones página 24

1 Hose coupling
2 Threaded bush
3 Clamp ring
4 Spring kink protection
5 Operator suction hose
 Mount the clamp ring, threaded bush on
the operator suction hose and insert
into the hose coupling.
Overall view
1 Suction hose operator with spring kink
protection
2 Hose coupling
3 Double casing suction hose
Installation information
The spring kink protection must be in-
stalled on the hose coupling and not on
the automatic nozzle.
24
 Adjust hose length on site. When the
automatic nozzle is attached, the suc-
tion hose operator may not lay on the
floor, and must therefore maintain a
minimum distance of 5 cm to the floor.
If necessary, adjust the length of the double
casing suction hose.
1 Knife
2 Double casing suction hose
3 Car nozzle mount
4 Car vacuuming tool
 Press in the latches of the car nozzle
mount.
 Remove the car nozzle.
 Unscrew the car nozzle mount.
 Shorten the double casing suction hose
using a knife.
– 5
EN