Safety Instructions - Würth HLG 1600 BASIC Traducción Del Manual De Instrucciones De Servicio Original

▸
This device is not intended for use
by children and persons
physical, sensory or mental capabilities,
or lack of e perience and kno ledge.
This device can only be used by children
aged 8 and over and persons
reduced physical, sensory or mental
capabilities or lack of e perience and/
or kno ledge if they are supervised by
a person responsible for their safety or
have received instructions from such a
person on safe handling of the device,
and understand the associated hazards.
Otherwise there is a risk of incorrect use and
injuries.
▸
Supervise children during use, cleaning
and maintenance. This will ensure that chil-
dren do not play with the device.
▸
Handle the device carefully. The device
generates significant heat, which results in a
heightened risk of fire and explosion.
▸
E ercise e treme caution if you are
orking in the vicinity of ammable
materials. The hot air flow or the hot nozzle
can ignite dust or gases.
▸
o not use the device in e plosive at-
mospheres.
▸
o not direct the hot air o
position for long periods. Flammable gases
may be generated when processing plastics,
paints or similar materials.
▸
Be a are that heat can be conducted
to concealed combustible materials
resulting in their ignition.
▸
Store the device safely after use and
let it cool do n completely stood on its
support points before packing it a ay.
The hot nozzle may cause damage.
▸
o not leave the device unsupervised
hen it is s itched on.
▸
Keep the device a ay from rain or
moisture. If water enters the device, there is an
increased risk of electric shock.
▸
o not use the cable other than for
its intended use, e.g. for carrying or
suspending the device or to pull the plug
out of the socket. Keep the cable away from
heat sources or oil. Damaged or tangled cables
increase the risk of an electric shock.
▸
Al ays ear safety glasses. Wearing
safety glasses reduces the risk of injuries.
12

Safety instructions

▸
ith limited
ith
▸
▸
▸
▸
▸
▸
▸
at the same
▸
▸
Before adjusting the device settings or
changing accessories, al ays pull the
po er plug out of the socket to prevent
inadvertent start-up of the device. This
precautionary measure prevents the unintentional
starting of the device.
Al ays check device, cable and plug be-
fore every use. Do not use the device if
you can see it is damaged. o not open
the device yourself if repair is necessary
it must be repaired by ualified spe-
cialist technicians using original spare
parts only. Damaged devices, cables and
plugs increase the risk of an electric shock.
Ensure your ork station is
tilated. Gases and vapours arising during
working are frequently hazardous to health.
Wear safety gloves and do not touch the
hot nozzle. There is a risk of burns.
o not direct the hot air o
people or animals.
Do not use the device as a hair dryer. The
discharged air flow is much hotter than the air
flow output from a hair dryer.
Ensure that no foreign bodies can get
into the device.
The distance bet een the nozzle and
orkpiece depends on the material to
be processed (metal, plastic, etc.) and
the intended type of processing. Always
carry out a preliminary test to ensure the selected
air quantity and temperature are suitable.
If operation of the device in a damp
environment is unavoidable, al ays use
a residual current circuit breaker (RC ).
Use of an RCD reduces the risk of electric shocks.
o not use the device
cable. o not touch the damaged cable
and pull out the mains plug if the cable
becomes damaged during
Damaged cables increase the risk of an electric
shock.
ell ven-
to ards
ith a damaged
orking.