Technical Data; Noise/Vibration Information; Declaration Of Conformity - BTI BH 2-26 Manual Original

OBJ_BUCH-3325-001.book Page 35 Friday, September 22, 2017 4:26 PM

Technical Data

Rotary Hammer
Article number
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Rated power input
Impact rate
Impact energy per stroke according to EPTA-Procedure 05/2009
Speed
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
Weight according to EPTA-Procedure 01:2014
Protection class
*not suitable with core bit
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these
values can vary.

Noise/Vibration Information

Rotary Hammer
Sound emission values determined according to EN 60745-2-6.
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 60745-2-6:
h
Hammer drilling in concrete:
a
h
K
Chiselling:
a
h
K
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
1 609 92A 41Y • 22.9.17
BH 2-26
9 090211
W 830
-1
min 0–4000
J
-1
min 0–1300
SDS-plus
mm
mm
mm
mm
mm
BH 2-26
dB(A)
dB(A) 102
dB
2
m/s 17,5
2
m/s
2
m/s
2
m/s
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.

Declaration of Conformity

We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with all relevant provisions of the direc-
BH 2-28 F
9 090212
 
 
 
–

880
0–4000
2,7 3,2
0–1300
SDS-plus
50 50
26 28
68 68
13 13
30 30
2,7 3,1
/II /II
BH 2-28 F
91 91
102
3 3
11
1,5 1,5
14 11
1,5 1,5
English | 35