Technical Data; Security Instructions - Berner RS25e Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
MAGNETIC-STAND DRILLING MACHINE RS5e

Technical data

Voltage
Frequency
Maximal rated input power
Rotation speeds under load
Clockwise / Anticlockwise
Weight
Adapter
Magnetic clamping force *
Lift
Core drill max.
Twist drill DIN 338
Twist drill DIN 1897
Twist drill DIN 345
Thread cutting
Contact surface
Height incl. engine max.

Security instructions

Attention:
Please read this manual carefully before using the
drilling unit.
The drilling units may only be used according to their
determination. The use of the drilling unit as a lifting
magnet is dangerous and absolutely inadmissible. The
use for another purpose than what is determined enda-
gers people and the machine.
Please note also the following safety instructions for
electric tools.
Attention:
Before the use of electric tools please note the following
basic safety instructions to avoid electric shock,
injuries and fire. Read and follow these instructions
before using the electric tool.
1.
Keep your working area tidy.
A working area that is not cleared up causes danger
of accidents.
2.
Consider external influences.
Do not expose electric tools to rain.
Do not use electric tools in damp or wet surroundings.
Good lighting is important. Do not use electric tools
near inflammable fluids or gases.

100-250 / 180-450 r.p.m.
3.
Protect yourself from electric shock.
Avoid body contact to earthed parts like pipes, radi-
ators, ovens, fridges.
Keep away from children.
4.
Do not let other people touch the tool or the cable -
keep them from your working area.
5.
Keep your electric tools in a safe place.
Unused tools should be kept in a dry, closed space
out of the reach of children.
6.
Do not overload your electric tools.
You will work better and safer within the indicated
power range.
7.
Use the right tool.
Do not use tools week in power for heavy strains.
Do not use tools for purposes other than determined,
e.g. do not use a circular saw for felling a tree or cut-
ting branches.
8.
Use suitable working clothes.
Do not wear loose clothing or jewelry. They could be
caught by moving parts of the tool.
If you are working outdoors it is recommendable to
wear rubber gloves and non-slipping shoes.
If you have long hair wear a hair-net.
9.
Use protective goggles.
Also use a breathing mask when carrying out work
that produces dust.
GB
RS 5e
220-240 V AC
50/60 Hz
1200 W
ja
16,0 kg
MK 2
13000 N
190,0 mm
60,0 mm
13,0 mm
16,0 mm
20,0 mm
bis M 20
190,0 x 90,0 mm
408,0 - 598,0 mm

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

53820

Tabla de contenido