Security Code; Ringer Level - GE 25859 Guia Del Usuario

S C
ECURITY ODE
NOTE: This setting may only be made with the base.
You can access the answering system from a tone dialing telephone in
another (remote) location. The security code is required for remote access,
and it prevents unauthorized access to your answering system. You may
only change the security code at the base.
1. Press the flash/program button until SECURITY CODE 1 2 3 shows in
the display.
2. Use the touch-tone pad to enter your new 3-digit security code. For
example, press the 6, 2, and 8 number keys for security code 628 . The
default security code is 123 .
NOTE: If you want to re-enter the security code, enter the numbers again and
press the flash/program button. The new numbers replace the old numbers.
3. Press flash/program again to store your selection. You will hear a
confirmation tone.
R L
INGER EVEL
NOTE: This setting may only be made with the base.
1. Press the flash/program button until SET RING LEVEL >1HI 2LO 3OFF
shows in the display. The default setting is 1HI .

SECURITY CODE

1 2 3
SET RING LEVEL
>
1HI 2LO 3OFF
13