Dialing A Caller Cid N; Dialing A Caller Id Number - GE 25859 Guia Del Usuario

D C
IALING A ALLER
When reviewing any call record in the Caller ID memory, you can dial back
the caller's number.
1. Make sure the phone is OFF (not in TALK mode).
2. Press CID/rev or CID/skip button (base) or CID-VOL ( - or + ) button
(handset) until the desired call record is displayed.
Depending on (a) how the incoming caller's phone number is formatted
when received, and (b) whether or not you pre-programmed your local
area code into memory, you may need to adjust the format of the caller's
phone number before dialing it back.
The format button lets you change the format of the displayed number.
Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
NOTE: If the incoming number is a Direct Dial Number, it is supplied by your
local phone company, and you may not adjust its format. When you press the
format/answerer button on handset or the format button on the base, PRESS
TALK KEY displays. Press the talk/call back button on handset or the speaker
button on base to dial the number.
3. If the number does not dial as shown, press the format/answerer button
on handset or format on the base. Repeat if necessary, until the correct
number of digits show in the display.
ID N
UMBER
long distance code "1"
+ 3-digit area code
+ 7-digit telephone number.
3-digit area code +
7-digit telephone number.
7-digit telephone number.
Explanation Example
1-317-888-8888
317-888-8888
888-8888
29