Dialing A Stored Number; Handset; Base - GE 25859 Guia Del Usuario

To Change: Follow the steps under Storing a Name and Number in Memory
except replace the stored name or number with the new information.
To Delete: Press memory on the handset or base, then press the CID/rev or
CID/skip on the base or the CID-VOL (- or + ) buttons on the handset to scroll
to the desired memory. Or press the desired memory location number.
NOTE : If you don't want to change or delete a number, press the *EXIT
button on the handset or base.
3. While the entry displays, press delete button on base or del/chan button
on handset to mark the entry for deletion. The display shows DELETE?
4. Press delete or del/chan again to delete the entry. DELETED is displayed.
D S
IALING A TORED
H :
ANDSET
Make sure the phone is ON by pressing the talk/call back button on the
cordless handset.
1. Press the memory button.
2. Press the desired memory location button (0-9). The stored telephone
number dials automatically.
-OR-
1. Make sure the phone is OFF (not in TALK mode).
2. Press the memory button.
3. Press the desired memory location button (0-9), or use the CID-VOL (- or
+) buttons to scroll to the desired telephone number.
4. Press the talk/call back button. The stored telephone number
dials automatically.
B :
ASE
Press the speaker button.
1. Press the memory button.
N
UMBER
25