Programming Functions; Time And Alarm Setting; Set Clock; Set Alarm - GE 27944 Guia Del Usuario

P
ROGRAMMING
The system uses a menu structure to give you access to all of the built-in features.You may
program the following items in main menu:Time and Alarm Setting, Ringer Setting, Phone
Setting and Display Setting.
NOTE: During programming, you may press the TONE*/exit button at any time to exit
and keep the previous setting.
T A
IME AND LARM
You may program the following items: Set Clock and Set Alarm.
S C
ET LOCK
Handset clock will be updated automatically with the Caller ID information when there is
incoming call (if you have subscribed the Caller ID service from your telephone operator).
However, if you want to manually set the clock, please follow the following procedures:
1. Make sure your phone is OFF (not in talk mode).
2. Press the MENU button to go to the main menu.
3. Use CID/VOL (+ or -) button to scroll to TIME & ALARM setting.
4. Press SELECT/TRANSFER button to confirm.
5. Use CID/VOL (+ or -) button to scroll to SET CLOCK.
6. Press SELECT/TRANSFER button to enter the menu. SET CLOCK shows in the display.
7. Use the touch-tone pad to enter the current time, then press SELECT/TRANSFER button
to confirm.
8. Use CID/VOL (+ or -) button to select AM or PM.
9. Press SELECT/TRANSFER button to save.You will hear a confirmation tone.
S A
ET LARM
1. Make sure your phone is OFF (not in talk mode).
2. Press the MENU button to go to the main menu.
3. Use CID/VOL (+ or -) button to scroll to TIME & ALARM SETTING.
4. Press SELECT/TRANSFER button to confirm.
5. Use CID/VOL (+ or -) button to scroll to SET ALARM.
6. Press SELECT/TRANSFER button to enter the menu. SET ALARM shows in the display.
10
F
UNCTIONS
S
ETTING