I N Use Indicator; Flash; Volume; Mute - GE 27944 Guia Del Usuario

1. Press theTALK/call back or SPEAKER buttons.
2. Press the REDIAL button.
-OR-
To choose from the last three numbers you dialed through menu:
1. Make sure the phone is OFF (not in talk mode).
2. Press MENU button to go to the Main Menu.
3. Use CID/VOL (+ or -) button to scroll to CALL RECORDS menu.
4. Press SELECT/TRANSFER button to enter the menu.
5. Use the CID/VOL (+ or -) button to scroll to DIALED menu.
6. Press the SELECT/TRANSFER button to confirm.
7. Use the CID/VOL (+ or -) button to scroll to desired record.
8. PressTALK/call back or SPEAKER buttons.The number dials automatically.
NOTE: Apart from choosing the numbers through the menu, you may press REDIAL
button to directly access the DIALED menu and perform Step 7 and Step 8 for quick access.
I U I
N SE NDICATOR
When the in use/charge indicator on the base is lit, the handset is either in use or charging.The
in use/charge indicator on the base flashes when you receive a call.
F
LASH
If you subscribe to the combined Call Waiting Caller ID service from your local telephone
company you will receive Caller ID information (if available) on Call Waiting calls. During a phone
call, you will hear a beep to indicate another call is waiting on the line and Caller ID information
for the waiting call shows on the handset display.To connect the waiting call, press the FLASH/
call wait button on the handset and your original call is put on hold.You may switch back and
forth between the two calls by pressing the FLASH/call wait button.
TIP: Do not use the TALK/call back button or SPEAKER button to activate custom
calling services such as call waiting, or you'll hang up the phone.
V
OLUME
When the phone is ON, press the CID/VOL (+ or -) on the handset to adjust the volume of the
handset's earpiece.There are four settings. Press the left arrow to increase the volume and
right arrow to decrease the volume.You will see the volume setting on the handset display. VOL
4 is the maximum and VOL 1 is the minimum.
M
UTE
To have a private, off-line conversation, use the MUTE feature.The party on the telephone line
cannot hear you, but you can hear them.
1. Press the MUTE button.The handset display shows MUTE ON.
2. Press the MUTE button to cancel and return to your phone conversation.
19