Kit Assembly - Metra 99-7357HG Instrucciones De Instalación

ISO DIN radio provision
1. Attach the radio brackets to the
radio housing trim panel.
(Figure A)
2. Mount the pocket to the bracket/
panel assembly with the
(4) #8 x 3/8" Phillips screws
supplied. (Figure B)
3. Slide the radio into the assembly
and secure with screws supplied
with the radio. (Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.
99-7357HG

Kit Assembly

(Figure A) (Figure B)
3
(Figure C)