Schumacher Electric PID-750 Manual Del Propietário página 10

5. Display shows
Watts continuous power.
Cycle inverter power OFF and ON.
If problem persists, use a larger inverter or a
smaller device.
6. Display shows
Increase ventilation to inverter.
Move inverter to a cooler area.
Reduce the power consumption of the device.
Inverter will automatically reset after cooling.
PROBLEM: Inverter Does Not Turn On
Reason/Solution
1. Poor contact at terminals.
Unplug and reinsert PID-750.
2. Fuse is blown.
A blown fuse is usually caused by reverse polar-
ity or a short circuit within the inverter. To replace,
contact a qualified service technician who will
diagnose the inverter and replace the fuse with the
appropriate replacement.
3. Inverter may be defective.
See warranty and call Customer Service
800-621-5485 (Hours: 7 a.m. – 4:30 p.m. CST).
HiP . Device demands more than 750
HoT . Inverter is too hot.
9