Led Display - Schumacher Electric PID-750 Manual Del Propietário

The LED readouts identify the current status of the
PID-750.
vOLTAGE IN: Voltage of vehicle's battery or Portable
Power jump starter/DC power source.
vOLTAGE OUT: Voltage supplied to device through AC
receptacle.
POWER OUT: Power or wattage supplied to device
plugged into the inverter.
An audio alarm will sound when the following codes display.
To stop the alarm, press the ON/OFF LED Selector button:
BaD – Inverter is not functional.
Customer Service 800-621-5485 (Hours: 7 a.m. – 4:30
p.m. CST).
Hi b – Vehicle's battery voltage is more than 15.5 volts.
Inverter will automatically restart after the voltage drops
below 15.0 volts.
HiP – The continuous load demand from the device
exceeds 750 watts.
HoT – Inverter is overheated and automatically turns off
for a period of 1–3 minutes to cool. Make sure inverter is
well ventilated. It will automatically restart after it cools.
Lo b – Vehicle's battery voltage is less than 10.5 volts.
SC – Short circuit, power surge or overload in the
device.

LED DISPLAY

7
See warranty and call