Replacing The Batteries - Dogtra iQ No Bark Guía De Utilización

REPLACING THE BATTERIES

* ATTENTION
- When the batteries are placed incorrectly, the LED indicator light may turn
on, but the unit will not operate properly.
- The unit is working properly when the LED Battery life indicator blinks once.
When the LED Battery life indicator blinks twice consecutively, the battery
will need to be replaced.
- Please remove the plastic battery seals before installing the batteries.
PROPER FIT
TROUBLESHOOTING
1. When do I replace the batteries on my iQ No Bark Collar?
- If the unit is not activating or the LED indicator does not turn on, the
batteries may need to be replaced. Overall battery life will be dependent
on usage. With the iQ No Bark Collar activating around 10 times a day, the
battery will have an average life of about 2-weeks.
- To clean the iQ No Bark Collar, make sure the battery cover is closed and
fully sealed, and wipe down the unit with a damp cloth and some alcohol.
Make sure the unit is completely dry before use.
- Using a coin, unscrew the battery cover
counterclockwise.
- Insert two batteries with the plus sides
facing out.
- Check to make sure that the rubber
gasket is in place, and screw in the
battery cover clockwise.
A proper fit is necessary for the iQ
No Bark Collar to work optimally.
Both contact points must be in contact
with your dog's skin at all times for a
consistent stimulation. A loose fitting
collar can cause the contact points to rub
against the skin and cause irritation.
13