How To Wire Your Ceiling Fan - Fanimation ODYN 84 Manual Del Usuario

NOTE: If fan or supply wires are different colors than indicated, have this unit installed by a qualified electrician.
WARNING
To avoid possible electrical shock, be sure electricity
s i u t n r e d o f f t a h t e m a n i
(Figure 1).
NOTE: If you are not sure if the outlet box is
grounded, contact a licensed electrician for advice, as
it must be grounded for safe operation.
CAUTION: INCORRECT WIRE CONNECTION COULD
DAMAGE THIS RECEIVER.
1. Slide the receiver into the hanger bracket as shown in
Figure 2.
2. Connect wires using connectors as shown in Figure 3.
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
3. After connections have been made, slide the receiver
into the hanger bracket, taking care not to pinch the
wires and put the white and green leads to one side and
the black leads towards the other side. The wires should
be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet
box and the ungrounded conductor on the other side.
(Figure 4).
All manuals and user guides at all-guides.com

How to Wire Your Ceiling Fan

u f s e b o x b e o f e r w r i n i g
Hanger Bracket
Receiver
L
BLACK
N WHITE
AC POWER
HANGER
BRACKET
HANGER
BALL
Receiver
RECEIVER HARDWARE USED:
WIRE
CONNECTORS
GREEN-Ground Wire
From Ceiling
GREEN-Ground Wire
From Hanger Bracket
GREEN-Ground Wire
From Hanger Ball
GREEN / YELLOW
- Ground Wire From
Receiver
RED
GRAY
YELLOW
10
MAIN FUSE BOX
Figure 1
NOTE: Supply wires
Figure 2
omitted for clarity
BLUE
BLACK
/ WHITE
GROUND
RED
GRAY
YELLOW
YELLOW
/ GREEN
DC MOTOR
BLACK
/ WHITE
BLACK
ANTENNA
LIGHT KIT
Figure 3
x 8
LISTED
OUTLET
BOX
WHITE
BLACK
BLACK & WHITE
Figure 4
BLUE
BLUE