Connecting The Control Unit - Imetec R7506 Instrucciones De Uso

EN
• When storing the appliance, allow it to cool down before folding.
WARNING! DO NOT crease the appliance by placing items
on top of it during storage.
WARNING! For use, cleaning, maintenance and storage of
the appliance, please follow the instructions specified in the
corresponding chapters.
• Persons with a pacemaker must NOT use this appliance.
• DO NOT use the appliance with wet hands or damp feet.
• DO NOT pull the power cable or the appliance itself to remove the plug
from the socket.
• DO NOT pull or lift the appliance by the supply cord.
• When using the appliance at home outside, do not expose the appliance
to humidity, to the effects of weather (rain, snow, etc. ) or to extreme
temperatures. DO NOT leave the appliance outside after use.
• If the appliance is faulty or malfunctions, switch it off and do not tamper
with it. Contact an authorised technical service centre for any repairs.
• DO NOT use this appliance to warm animals.
• DO NOT tuck in.
• See the external packaging for the characteristics of the appliance.
• Spread the throw over your sofa, armchair or bed ensuring that the throw
connector is at the foot position.
• Place the throw over you without wrapping it tightly and without sitting on it as this
may cause the overheat protection system to activate.

CONNECTING THE CONTROL UNIT

• Insert the control unit connector (2) in the throw connector (1) to connect the control
unit to the throw.
• Insert the plug of the control unit cable in the mains socket (3). Every time the plug is
15
DO NOT INSERT PINS OR NEEDLES.
USE