Check Generator Surroundings; Grounding The Generator - Makita EG Serie Manual De Instrucciones

2. CHECK ENGINE FUEL (See Fig.
Do not refuel while smoking or near open
fl ame or other such potential fi re hazards.
Otherwise fi re accident may occur.
■ Check fuel level at fuel level gauge (See Fig. -③)
■ If fuel level is low, refi ll with unleaded automotive
gasoline.
EN
■ Be sure to use the fuel fi lter screen on the fuel fi lter
FR neck. (See Fig. -④)
DE
❶ LEVEL
❷ FUEL TANK CAP
NL
❸ FUEL FILTER SCREEN
ES
IT
Fuel Amount
up to "LEVEL" position :
PT
EG241A . . . . . . . . . . . . . . . . . . . . . . . 12.8
GR
EG321A, EG321AE . . . . . . . . . . . . . 12.8
EG441A, EG441AE . . . . . . . . . . . . . 12.8
NO
EG601A, EG601AE . . . . . . . . . . . . . 22.0
SE
EG671A, EG671AE . . . . . . . . . . . . . 22.0
FI
DK
RU
Make sure you review each warning in order to
prevent fi re hazard.
■ Do not refi ll tank while engine is running or
hot.
■ Close fuel cock before refueling with fuel.
■ Be careful not to admit dust, dirt, water or
other foreign objects Into fuel.
■ Wipe off spilt fuel thoroughly before starting
engine.
■ Keep open fl ames away.
3. CHECKING COMPONENT PARTS
Check following items before starting engine:
■ Fuel leakage from fuel hose, etc.
■ Bolts and nuts for looseness.
■ Components for damage or breakage.
■ Generator not resting on or against any adjacent
wiring.
6
-③,④)
WARNING
(L)
WARNING

4. CHECK GENERATOR SURROUNDINGS

WARNING
Make sure you review each warning in order to
prevent fi re hazard.
■ Keep area clear of in fl ammables or other
hazardous materials.
■ Keep generator at least 3 feet (1 meter) away
from buildings or other structures.
■ Only operate generator in a dry, well
ventilated area.
■ Keep exhaust pipe clear of foreign objects.
■ Keep generator away from open fl ame. No
smoking!
■ Keep generator on a stable and level surface.
■ Do not block generator air vents with paper
or other material.

5. GROUNDING THE GENERATOR

■ To ground the generator to the earth, connect the
grounding lug of the generator to the grounding
spike driven into the earth or to the conductor
which has been already grounded to the earth.
(See Fig. -⑤)
❶ GROUNDING SPIKE
■ If such grounding conductor or grounding electrode
is unavailable, connect the grounding lug of the
generator to the grounding terminal of the using
electric tool or appliance. (See Fig. -⑥)
❶ GROUND TERMINAL
6. BATTERY INSTALLATION (See Fig.
(Electric Starter Model)
Recommended Battery
Type ; Lead-acid battery
Capacity
(Ah/5hr) ; 12V-21AH or more
Size ; Less than 185(L) x 125(W) x 160(H) mm
❶ EARTH CABLE(BLACK)
❷ STARTER CABLE(RED)
❸ SETTING PLATE
❹ SETTING BOLT
❺ BATTERY PLATE
❻ BATTERY FRAME #1
❼ BATTERY FRAME #2
❽ PROTECTION PLATE
❾ BOLT
❿ NUT
-⑦)