Spark Arrester; How To Remove The Spark Arrester; Clean The Spark Arrester Screen - Makita EG Serie Manual De Instrucciones

6. SPARK ARRESTER

In a dry or wooded area, it is recommendable to use the product with a spark arrester. Some areas require the use
of a spark arrester. Please check your local laws and regulations before operating your product.
The spark arrester must be cleaned regularly to keep it functioning as designed.
A clogged spark arrester :
●Prevents the fl ow of exhaust gas
●Reduces engine output
●Increases fuel consumption
●Makes starting diffi cult
If the engine has been running, the muffl er and the spark arrester will be very hot. Allow the muffl er to cool before
cleaning the spark arrester.
EN
FR
DE

How to remove the spark arrester

NL
1. Remove the fl ange bolts from the muffl er cover and
remove the muffl er cover.
ES
IT
2. Remove the special screw from the spark arrester
PT
and remove the spark arrester from the muffl er.
GR
NO
SE
FI
DK
RU

Clean the spark arrester screen

Use a brush to remove carbon deposits from the
spark arrester screen.
Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and
holes. Replace the spark arrester if it is damaged.
Install the spark arrester, and muffl er protector in
the reverse order of disassembly.
12
EG601A, EG601AE
EG671A, EG671AE
Muffler
Spark arrester screen
EG601A, EG601AE
EG671A, EG671AE
Spark arrester screen
Screw