Dash Disassembly - Metra 95-5844S Instrucciones De Instalación

1. Unclip and remove the panel surrounding
the shifter. (Figure A)
2. Remove (2) 9/32" screws from the
bottom of the radio/climate control trim
panel, and then unclip and remove.
(Figure B)
3. Remove (4) 9/32" screws securing the
radio and then remove.
Radio/climate control trim panel disassembly:
4. Remove (4) Torx T-20 screws and remove
the factory pocket/ ashtray assembly
from the factory dash panel. (Figure C)
5. Remove (4) 7/32 screws and remove the
factory climate controls. (Figure C)
6. Remove all the factory button assembly's
from the factory dash panel. (Figure C)
7. Remove (7) Torx T-20 screws and (4)
push-nuts to remove the center panel
from the factory dash panel. (Figure C)
Continue to Kit Preparation
2

DASH DISASSEMBLY

(Figure A)
(Figure B) (Figure C)
|
1.800.221.0932 MetraOnline.com