Usb Operation - SOUNDMASTER UR2090 Manual Del Usuario

1. Insert the USB memory device into the USB socket.
2. Turn the device on and press the "SOURCE" button to switch to USB mode. The display will
show "USB".
3. After reading the display shows the tracks of the USB device and starts playback
automatically.
4. Press the "PLAY/PAUSE" button to interrupt the playback. Press the button again to resume
playing.
5. Press the "SKIP/TUNE
6. Press the "M+/10+" or "M-/10-" button to skip down or up by 10 tracks.
7. Press the "STOP
NOTE:
The unit may not support some USB devices. This is due to the incompatibility of some
processors.
Repeat Function
Repeat one track on Music CD or USB
1. During CD or USB playback press the "SKIP/TUNE
which you want to repeat.
2. Press the "P-MODE" button until the "
selected track repeatedly.
3. To cancel the setting press the "P-MODE" button continuously until the "
indicators disappear.
Repeat the entire DISC or USB device
1. During CD or USB playback press the "P-MODE" button continuously until the
" ALL" indicator shows on the display. The unit will play all tracks on the disc repeatedly.
2. To cancel the setting press the "P-MODE" button continuously until the "
indicators disappear.
To improve the best FM radio reception try altering the position/length of the FM wire antenna.
1. Turn the device on and press the "SOURCE" button to switch to FM radio mode.
2. Press the "SKIP/TUNE
3. Press and hold the "SKIP/TUNE
Saving and playing a station as a Preset
1. Press the "SKIP/TUNE
2. Press the "CLK SET/MEM" button. Preset number (P01) will appear on the display.
3. Press the "M+/10+" or "M-/10-" buttons to adjust the desired preset number (P01-P20).
4. Press the "CLK SET/MEM" button to save the current FM radio station to this selected
preset.
5. Repeat steps 1 to 4 to program further radio stations.
6. Press the "M+/10+ or "M-/10-" buttons to cycle through saved radio stations.

USB OPERATION

" button to select a track.
/
" button to stop the play mode.
" buttons to tune the radio manually in 50kHz steps.
/
/
" buttons to tune the FM radio to the desired station.
/
/
1" indicator shows on display. The unit will play the
RADIO
" buttons to scan for available stations.
4
UR2090 / English Instruction Manual
" buttons to select the track
1" or "
1" or "
ALL"
ALL"