Bluetooth Function; Aux-In Function; Technical Specification - SOUNDMASTER UR2090 Manual Del Usuario

Pairing to a device and playing audio
1. Turn the device on and press the "SOURCE" button to switch to BLUETOOTH mode.
The Bluetooth indicator will light up.
2. Press and hold the "PAIR/PLAY/PAUSE" button to begin pairing. The indicator on the
display will begin flashing quickly.
3. Start the Bluetooth mode on your Bluetooth device and start the scan. Select "UR2090SI in
your setting to pair it. If your device requests a password enter the default password "0000".
4. When the devices are successfully paired the
an audible chime will sound through the speaker.
5. Use the controls on the connected device to select an audio track, to start the playback,
pause etc.
After initial pairing the unit will stay paired unless you manually disconnect the connection or the
devices are out of range.
You require a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the "LINE IN" input on the right side of the unit and the
audio output on an audio device.
2. Turn the device on and press the "SOURCE" button to switch to LINE IN mode.
3. Use the controls on the connected device to start the playback.
Power supply
Power input
Power output
Backup Battery
FM range
Bluetooth Version
Audio power output
Wörlein GmbH
Gewerbestrasse 12
D 90556 Cadolzburg
Germany
Technische Änderungen und Druckfehler vorbehalten
Copyright by Woerlein GmbH, 90556 Cadolzburg,
Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH

BLUETOOTH FUNCTION

AUX-IN FUNCTION

TECHNICAL SPECIFICATION

: Use only the supplied power adapter
: 100-240V~ 50/60Hz
: 5V 1.2A
: 2x DC 1.5V UM-3 AA type batteries (not included)
: 87.5 – 108MHz
: Version 4.2
: 2x 2W RMS
IMPORTER
Tel.: +49 9103 71 67 0
Fax.: +49 9103 71 67 12
Email: service@woerlein.com
Web: www.woerlein.com
www.woerlein.com
UR2090 / English Instruction Manual
indicator on the display will stop flashing and
5