GRAPHITE 58G013 Manual De Instrucciones página 12

TRANSLATION OF
THE ORIGINAL INSTRUCTIONS
CORDLESS MULTI TOOL
58G013
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
DETAIL SAFETY RULES (CORDLESS MULTI TOOL)
• During operation hold the tool firmly in closed hand.
• Before switching the tool on make sure it does not touch
processed material.
• Before cutting floor, wall or other surface make sure the cut area
is free from gas or electric installation. Cutting a live wire may
cause electric shock and cutting a gas pipe may cause explosion.
• Do not touch moving parts of the tool.
• Do not put the tool aside before it stops completely.
• Hold the tool firmly in your hand before switching it on.
• Do not touch blade and processed material just after the work
has been finished, the pieces may be very hot and may cause
burns.
• To replace blade or sanding paper, first switch the tool off with
the switch and wait until it stops working, then disconnect the
tool from mains socket.
• Prior to operation make sure that there is enough space under
processed material to avoid table or floor damage with the
blade.
• Use anti-dust mask. Dust produced during operation is harmful
to health.
• Do not eat, drink or smoke in a room, where paint with lead
compounds is removed with this tool. There should be no
bystanders in the room. Contact with or inhalation of dusts with
lead compounds may be harmful to health.
• Before sanding connect dust extraction system to the tool.
• The tool is not designed for wet operation.
• When you experience unusual behaviour of the tool, see smoke
or hear strange noises, immediately switch off the tool and
remove the battery.
• To ensure proper cooling during tool operation keep the
ventilation holes unobstructed.
SAFETY INSTRUCTIONS FOR BATTERY
• In case of battery damage and improper use it may produce gas.
Ventilate room and seek medical attention in case of medical
symptoms. Gas can damage respiratory tract.
• Improper operation conditions may lead to battery electrolyte
leak, avoid contact with the substance. In case of accidental
contact, flush the electrolyte abundantly with water. In case of
contact with eyes, additionally seek medical attention. Leaked
electrolyte may cause eye irritation or burns.
• Do not disassemble the battery – there is a risk of short circuiting.
• Do not use power tool battery in rain.
• Always keep the battery away from sources of heat. Do not leave
the battery for a long time in high temperature (in direct sunlight,
in proximity of heaters and wherever the temperature exceeds
50°C).
SAFETY INSTRUCTIONS FOR BATTERY CHARGER
• This equipment is not intended for use by persons with restricted
physical, sensory or mental capabilities (including children)
or persons who have no experience or are unfamiliar with
the equipment, unless the use is supervised or carried out in
accordance with equipment use instructions handed over by
persons responsible for their safety.
• Pay attention to children so they don't play with the equipment.
• Do not expose the charger to humidity or water. Ingress of water
into the charger increases risk of electric shock. Use the charger
only in dry rooms.
• Disconnect the charger from power supply before starting any
maintenance or cleaning.
• Do not use the charger when placed on flammable surface (e.g.
paper, textiles) or in proximity of flammable substance. Greater
charger temperature when charging increases risk of fire.
• Check condition of the charger, cable and plug before each
use. Do not use the charger if any damage is found. Do not try
to disassemble the charger. All repairs should be made at an
authorized service workshop. Improper charger assembly may
cause electric shock or fire.
• Children or persons who are physically, emotionally or mentally
disabled and other persons, whose experience or knowledge
is insufficient to use the charger while following all safety rules
should not use the charger without supervision of person
responsible for their safety. Otherwise there is a risk of improper
use and injuries in consequence.
• When the charger is not in use, it should be disconnected from
the mains network.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and
additional safety systems are used, nevertheless there is always
a small risk of injuries at work.
Li-Ion batteries may leak, set on fire or explode when heated to
high temperature or short-circuited. Do not store the batteries
in a car in hot and sunny days. Do not open the battery. Li-Ion
batteries contain electronic protection devices that, if damaged,
may cause fire or explosion of the battery.
Explanation of used symbols
1 2
5 6
9 10
13 14
CAUTION! Use precaution measures.
1.
Read instruction manual, observe warnings and safety
2.
conditions therein!
12
3 4
7 8
11 12
15