Technical Parameters; Environmental Protection - GRAPHITE 58G013 Manual De Instrucciones

TECHNICAL PARAMETERS

RATED PARAMETERS
Cordless Multi Tool 58G013
Parameter
Supply voltage
Idle oscillation speed
Oscillation angle
Working tools attachment system
Protection class
Weight
Year of production
58G013 defines type and indication of the device
Graphite Energy+ System Battery
Parameter
Battery
Battery voltage
Battery type
Battery capacity
Ambient temperature range
Charging time for charger 58G002
Weight
Year of production
Graphite Energy+ System Charger
Parameter
Charger type
Supply voltage
Power supply frequency
Charging voltage
Max. charging current
Ambient temperature range
Charging time of the battery 58G001
Charging time of the battery 58G004
Protection class
Weight
Year of production
DANE DOTYCZĄCE HAŁASU I DRGAŃ
Sound pressure (sanding)
Sound pressure (sawing)
Sound pressure (scraping)
Sound power (sanding)
Sound power (sawing)
Sound power (scraping)
Vibration acceleration (sanding
– main handle)
Value
18 V DC
5000-20000 rpm
3°
tool free
III
1,8 kg
2019
Value
58G001 58G004
18 V DC 18 V DC
Li-Ion Li-Ion
2000 mAh 4000 mAh
4 0 C – 40 0 C 4 0 C – 40 0 C
1 h 2 h
0,400 kg 0,650 kg
2019 2019
Value
58G002
230 V AC
50 Hz
22 V DC
2300 mA
4 0 C – 40 0 C
1 h
2 h
II
0,300 kg
2019
Lp = 90,8 dB(A) K= 3 dB(A)
A
Lp = 96,8 dB(A) K= 3 dB(A)
A
Lp = 94,4 dB(A) K= 3 dB(A)
A
Lw = 101,8 dB(A) K= 3 dB(A)
A
Lw = 107,8 dB(A) K= 3 dB(A)
A
Lw = 105,4 dB(A) K= 3 dB(A)
A
2 2
a = 8,813 m/s K= 1,5 m/s
h
Vibration acceleration (sanding
– additional handle)
Vibration acceleration (sawing
– main handle)
Vibration acceleration (sawing
– additional handle)
Vibration acceleration
(scraping – main handle)
Vibration acceleration
(scraping – additional handle)
Noise and vibration information
Noise produced by the device is defined with: level of produced
sound pressure Lp and level of sound power Lw
A
measurement uncertainty). Vibrations produced by the device
are defined with vibration acceleration value a
measurement uncertainty).
Sound pressure Lp , sound power Lw
A
specified in this manual have been measured in accordance with EN
60745-1. Specified vibration level a
and for initial evaluation of exposition to vibrations.
Specified vibration level is representative for main applications
of the device. When the device is used for other purposes or with
different working tools, the vibration level may change. Insufficient
or too rare maintenance may increase vibration level. The
abovementioned factors may lead to higher exposure to vibrations
during whole working time.
To precisely define exposure to vibrations, include periods when
the device is switched off and when it is switched on but not used
for working. Once all factors have been carefully considered, total
exposition to vibrations may be significantly lower.
To protect the user from results of exposure to vibrations, use
additional safety measures such as: device and working tool periodic
maintenance, proper hand temperature conditions, good work
organisation.

ENVIRONMENTAL PROTECTION

Electrical equipment must not be disposed off with
household waste and, instead, should be utilized
at appropriate facilities. Information on utilization
can be provided by the product vendor or the local
authorities. Waste electrical and electronic equipment
contains substances that are not neutral to the
natural environment. Equipment that is not recycled
constitutes a potential hazard to the environment and
to human health.
Storage batteries/batteries must not be disposed with
domestic waste, put in a fire or into the water. Damaged
or used up storage batteries must be properly recycled
in compliance with the current directive pertaining to
disposal of storage batteries and batteries.
Li-Ion
* Right to introduce changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa
with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs,
that all copyrights to this instruction (hereinafter Instruction), including, but not
limited to, text, photographies, schemes, drawings and layout of the instruction,
belong to Grupa Topex exclusively and are protected by laws accordingly to
Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim
i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modifications for commercial purposes of the
entire Instruction or its parts without written permission of Grupa Topex are
strictly forbidden and may cause civil and legal liability.
15
2 2
a = 12,161 m/s K= 1,5 m/s
h
a = 7,924 m/s 2 K= 1,5 m/s 2
h
a = 13,089 m/s 2 K= 1,5 m/s 2
h
2 2
a = 11,925 m/s K= 1,5 m/s
h
2 2
a = 15,258 m/s K= 1,5 m/s
h
(where K is
A
(where K is
h
and vibration acceleration ah
A
can be used to compare tools
h