Animals; Battery - Heiniger Opal Traducción Del Manual Original

Before connecting to the power supply, compare the technical
X
data with the data of the power supply system and only connect
in case of concordance.
Only plug the charging station in undamaged outlets.
X
Never wrap the cable around the clipper. Keep the cable away
X
from hot underlays and objects. Keep the clipper away from
moisture. This can cause a short circuit.
Never clip wet animals.Just clean the machine dryly with a
X
brush and the cleaning brush.
Generally, never plunge the clipper and clipperhead into liquids
X
such as water, soapy water, diesel, petrol, etc. This may cause
serious injury to mechanics and motor.
Do not switch-on the clipper or the charging station if you su-
X
spect liquid to be penetrated. Hand it over to a service centre.
Before commencing any maintenance work disconnect the
X
electrical power supply by pulling out the plug. Even with the
machine switched off, do not handle the area round the clipper
blades as long as the machine is still connected to a power
source. Whenever working on the clipper blades/clipperhead,
always first disconnect the power supply.
1.6

Animals

WARNING!
The noise of the clipper can trouble animals. A kick, an attack or
the weight of the animal can cause serious injuries. Therefore:
Just persons being experienced in handling with animals are
X
allowed to clip the animals.
Fix and calm the animal sufficiently before clipping.
X
Work carefully.
X
Unauthorised persons are not permitted to approach the clip-
X
ping place.
1.7

Battery

Do not charge, place or leave the appliance where it is expected
to be:
y subject to damage by an animal, or
y exposed to weather
Plug charger directly into receptacle – do not use an extension
X
cord.
Unplug charger before plugging or unplugging appliance.
X
Translation of the original instructions / Small animal clipper
5