Transportation, Put On Service And Use - Fama TV ÉLITE Manual De Instruccion

Tools post group:
1. Taken into consideration of the machine use modalities and of its use destination, the mobile elements are both isolated
from fixed shelters, mobile ones or other safety devices, placed at the distances from the access points such why
dangerous points aren't reachable;
2. on the handle and pressure group is placed a micro switch that stops the tools rotation when it is possible to access
through the loading mouth;
3. the loading mouth to cut, presents an adequate length: the tools result be placed at the distances from the access points
such why aren't reachable;
4. on the cover of the machine superior zone is placed a micro switch that stops the tools rotation when it is possible to
access through the loading zone;
5. in the unloading zone in correspondence of the product exile, the particular expeller disc conformation and the rotating
discs doesn't allow to the hand or part of it to reach the parts in movement and however parts with dangerous points;
Pressure handle with micro switch
Pressure handle with micro switch
CAP. 4. TRANSPORTATION, PUT ON SERVICE AND USE
WORK PLACES AND OPERATORS TASKS
As described in the instructions manual for the use, the machine is designed to be driver from an operator trained and
qualified on the residual risks, but with the competences, in matter of safety, of the maintenance employees.
The work normal zone of the operator is:
1. The machine lateral zone near the loading mouths (defined loading zone) in functioning normal conditions for the
manual loading operations of the food product and during the pestle use to convey the food product within the machine
neck, with the fixed and mobile shelters in closed and blocked position;
2. The machine anterior zone near the food product loading zone in functioning normal conditions for the manual withdraw
of the food product stored in an appropriate container, with the fixed and mobile shelters in closed and blocked position
PREPARATION PRELIMINARY OPERATIONS
STABILITY
The machine stability is designed so that, in the foreseen functioning conditions, taking into considerations of the climatic
conditions, is such to allow the use without the pouring risk, falling or untimely moving.
Taking into consideration of the conformation and its position, the machine results to be essentially steady without needs of
work bench fastening.
All support pressure feet placed under the base must support on a solid surface, uniform and well leveled.
VEGETABLE PROCESSOR
Dismantled superior cover with micro
switch
VEGETABLE PROCESSOR ELITE
Dismantled superior cover with micro
switch
ORIGINAL INSTRUCTIONS TRASLATION
Loading mouth fixed shelter to cut
Loading mouth fixed shelter to cut
Pag.
9
di
17