Installation - Agilent Technologies Turbo-V 903 Manual De Instrucciones

Installation

Do not remove the adhesive and protective cap before connecting the turbopump
CAUTION!
to the system.
Install this device only in indoor ambient and in any case don't use in an
environment exposed to atmospheric agents (rain, snow, ice), dust, aggressive
gases, or in explosive environments or those with a high fire risk.
During operation, the following environmental conditions must be respected:
In the presence of magnetic fields the pump must be protected using a
ferromagnetic shield. See the appendix "Technical Information" for detailed
information.
The TV 903 Pumping System must be connected to a primary pump (see
"Technical Information").
Turbo-V 903 Pumping System User Manual / 87-901-016-01
maximum pressure: 2 bar above atmospheric pressure
temperature: from +10 °C to +35 °C
relative humidity: 0 – 90 % (non-condensing)
Instructions for Use

Installation

(A)
17
251/306