Publicidad
10. shape (geometry selection for volume calculation)
Go to this menu by using arrow keys and press E key. select the relevant one among
"RECTANGLE" (RECTANGLE DEPOT), "CYLINDER" (CYLINDRICAL PERPENDICULAR
DEPOT), "H-CYLINDER" (CYLINDRICAL HORIZONTAL DEPOT) and "SPHERE"
(sPHErIcAL dEPOt) which is the tank type to be measured for volume by using up &
down arrow keys. Enter dIM_X, dIM_Y, dIM_z and dIM_d sizes for selected unit.
• Shape is a visible menu if VOLUME is selected from Type menu.
11. Parshal Flume
If Flow option is selected, then MainValue value shows speed of parshal flume; m
Lt/s F
/s and Gl/s. While MainValue value appeared, by using up-down keys, it is
3
passed to the indicator where total counter is located. When it is reached to total
counter display; tOtAL M
selected and the corresponding value is seen in the line below.. the counter value
is shown as m
, even if the selected measuring value is Lt/s. While the value shown
3
for m
is with 1 decimal, it has no decimal for feet
3
the counter up to 999999.9 M
Feet
, Gallon), then turns to zero. In order to reset the counter manually; left arrow
3
key is hold pressed for two seconds if any of options of parshal flume is checked as
measuring. rEsEt MEtErs appears on the screen and it flashes. counter is reset
if E key is pressed while the screen flashes and it is written PArsHAL rEsEt on the
screen. Any key other then E key is pressed if it is desired to cancel while the screen
flashes or the device restores to normal operation if no key pressed for 4 seconds.
, tOtAL F
or tOtAL GL appears as per measuring unit
3
3
whatever selected displaying unit it is set (liter,
3
and gallon. Parshal flume counts
3
Orion Echo Ultrasonic Level Probe
/s
3
21
Publicidad
Capítulos
