Kit Assembly - Metra 95-7365B Instrucciones De Instalación

1. Secure the radio brackets to the radio
using the screws supplied with the radio.
(Figure A)
2. Snap the radio trim panel into the
factory trim bezel from the back side of
the bezel. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or Axxess.
Test the radio for proper operation.
4. Secure the radio assembly to the dash
using the factory screws, then reassemble
the dash in reverse order of disassembly.

KIT ASSEMBLY

(Figure A) (Figure B)
3
REV.5/16/2018 INST95-7365B