Lcd Display; Geting Started; Batteries - Oregon Scientific RRM313P Manual De Usuario

1. 4.5V AC / DC Adapter Socket
2. Battery Compartment (cover on): 2 x UM-3 / AA
1.5V batteries
3. RESET: Press to return all values to the default
settings
4. PROJECTION ON / OFF: Slide to ON for continuous
image projection when the AC power is connected
5. Radio Antenna
6. EU / UK (RRM313P only) Select nearest radio signal
base i.e. England or Germany

LCD DISPLAY

1. Time
2. Alarm on / off
3. Radio alarm on / off
4. Alarm time / Calendar
5. Offset time zone
6. Radio-controlled clock reception
7. Battery status
8. AC adapter is disconnected
9. FM radio display / sleep / volume level

GETING STARTED

BATTERIES

Batteries are supplied with this product:
• 2 x UM-3 / AA 1.5V batteries
NOTE The batteries are for back-up use only. Please The batteries are for back-up use only. Please
use the adapter for continuous use.
NOTE It is recommended that you use alkaline batteries
with this product for longer performance.
Insert batteries before first use, matching the polarity
(+ and -) as shown below. Press RESET after each
battery change.
NOTE Do not use rechargeable batteries with this Do not use rechargeable batteries with this
product.
3