Worx Jawsaw WG329E Manual Original página 9

The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Wrench
Oil Bottle
Chain oil (100ml)
Charger
Battery (WA3551.1)
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality chain oil. Use only replacement bar and chain of the same specification. Your
retailer can advise the correct purchase.
Cordless Limbing and Trimming Chain Saw
C or less
0
WG329E
1 (WA3760)
1
WG329E.5
1
1
1
1 (WA3860)
1
WG329E.9
/
/
EN
9