Operation Panel - DENTSPLY x-smart plus Manual Del Usuario

6.2.

Operation Panel

6
5
1 POWER
2 SPEED + / -
3 TORQUE + / -
4+5 SYSTEM  / 
6+7 FILE ⊳ / 
8 REV
FISDR-JAP / F1902124.X / 00 / 2011 – created 07/2011
1 10 9
2 11
Switches the device on and off (keep pressed for more than 2
seconds).
Adjust the rotation speed (possible only for continuous rotary
systems).
Adjust the torque limit (possible only for continuous rotary
systems).
Change the file system.
Change the file within a system.
Changes the rotational direction of the file (only possible for
continuous rotary systems).The rotational direction can also be
changed while the file is in motion.
Fig. 1 Operation Panel
8 12
3
13
14
4
7
- 13 / 208 -