Descargar Imprimir esta página

Sauder Harbor View 414941 Instrucciones De Montaje página 16

Publicidad

Step 12
Fasten two KNOBS (5K) to the SMALL DRAWER FRONT (H). Use two BLACK 1-1/8" MACHINE SCREWS (21S).
å
Apply the WARNING LABEL (5L) to the small drawer's DRAWER BOTTOM (D945). You should be able to read the label
å
when the drawer is open. When the drawer is closed, it will hide the label. Peel off the backing and apply the label as
shown in the diagram.
NOTE: The drawer with the WARNING LABEL should be inserted into the top of your unit as shown in the next step.
å
Fasten two PULLS (98K) to the LOWER DRAWER FRONT (I). Use four SILVER 3/4" MACHINE SCREWS (20S). Repeat this step
å
for the remaining drawers.
5L
5K
Page 16
BLACK 1-1/8" MACHINE SCREW
(2 used for the KNOBS)
D945
H
98K
414941
21S
Serious or fatal crushing injuries can
occur from furniture tip-over. To help
prevent tip-over:
-Place heaviest items in the lowest drawers.
-Unless specifi cally designed to accommodate,
do not set TVs or other heavy objects on top of
this product.
-Never allow children to climb or hang on
drawers, doors, or shelves.
-Never open more than one drawer at a time.
-If equipped with a drawer interlock system, do not
defeat or remove it.
Use of tip-over restraints may only reduce,
but not eliminate, the risk of tip-over.
I
WARNING
20S
SILVER 3/4" MACHINE SCREW
(16 used for the PULLS)
www.sauder.com/services

Publicidad

loading