JVC DT-V1700CG Instrucciones página 8

SDI INPUT CARD (OPTIONAL: IF-C01SDG)
SWITCHED
OUT
1
IN
SDI 1
2
IN SDI 2
AUDIO 1
3
IN OUT
AUDIO 2
Compatible signal formats: 480/60i, 480/50i
HD SDI INPUT CARD (OPTIONAL: IF-C01HSDG)
SWITCHED
OUT
1
HD SDI 1
IN
2
IN
HD SDI 2
AUDIO
3
IN OUT
Compatible signal formats: 720/60p, 1035/60i, 1080/50i,
1080/60i, 1080/24pSF
Output terminal for a selected component
1
serial digital signal
Output terminal for s selected digital signal (the input
displayed on the screen). The output signal is cable-
compensated.
NOTE: When the monitor's power is OFF, no digital
signal is output.
Input terminals for component serial digital
2
4
signals
Input terminals for the digital signal.
Select SDI 1 : press INPUT SELECT A/C/E button
Select SDI 2 : press INPUT SELECT B/D/F button
3 Audio input/output terminals
Input (IN) and output (OUT) terminals for the analogue
signals corresponding to SDI 1 and SDI 2.
NOTE: This input card cannot decode audio data even if
contained in the input digital signal.
Connection terminal (to a Multi-Format
4
Monitor)
Attach to the connection terminal of your multi-format
monitor.
1 Output terminal for a selected component
serial digital signal
Output terminal for s selected digital signal (the input
displayed on the screen). The output signal is cable-
compensated.
NOTE: When the monitor's power is OFF, no digital
signal is output.
Input terminals for component serial digital
2
4
signals
Input terminals for the digital signal.
Select HD SDI 1 : press INPUT SELECT A/C/E button
Select HD SDI 2 : press INPUT SELECT B/D/F button
3
Audio input/output terminals
Input (IN) and output (OUT) terminals for the analogue
audio signals.
NOTE: This input card cannot decode audio data even if
contained in the input digital signal.
4 Connection terminal (to a Multi-Format
Monitor)
Attach to the connection terminal of your multi-format
monitor.
7