Screening Calls From The; Spacemaker; Message Playback; Answering Systemm - GE SPACEMAKER 26976 Guia Del Usuario

S C
CREENING
You can screen incoming calls by waiting for the caller to begin leaving a
message (to hear who it is), then pick up the handset and press the TALK/
CALLBACK or speaker button on the Spacemaker® unit to talk to the
caller. The answering machine automatically stops recording when you
activate the handset or pick up an extension phone.
TIP: Make sure the volume on the Spacemaker
hear your incoming calls. See Message Playback tips below for setting
the volume level.
M P
ESSAGE LAYBACK
The Spacemaker
play messages, press the play/stop button.
While a message is playing, you can do the following:
• Press the play/stop button to stop the message playback.
• Press and release the review button to restart the current message;
continue to press and press again the review button to go to
previous messages.
• Press and release the skip button to go to the next message.
• Press the erase button to erase the playing message.
• Press the CID/VOL (+) or CID/VOL (-) buttons (up and down arrows) to
adjust the speaker volume. Please note that the volume level set will
apply to call screening a well.
A S
NSWERING
When the memory is full, the system answers after 10 rings , and an " F "
displays after the number of messages, e.g. MSG 59F , on the right side of
the Spacemaker
answering machine can record new messages.
E M
RASING ESSAGES
Erase messages two ways: one message at a time with the erase button
or you may delete all messages with one long press of the erase button.
• To erase a message while its playing, press and release the erase button.
ALLS FROM THE
®
display lets you know when you have messages. To
M
YSTEM EMORY
®
display. You should erase some of the messages so the
®
S
PACEMAKER
®
F
ULL
is set loud enough to
31